ASTM Standards - Environ Testing Laboratory

ASTM STANDARDS

The American Society for Testing and Materials publishes a variety of "Standards" which serve as a basis for tests. Environ regularly tests to the following ASTM standards, and will make every effort to produce competitive bids under standards not listed herein. Please call for a full discussion of the ASTM standard which concerns your product.

B 117	Operating Salt Spray (Fog) Apparatus
B 368	Copper Accelerated acetic Acid – Salt Spray (Fog) Testing
B 827	Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
C 1149	Specification for Self-Supported Spray Applied Cellulosic Thermal/Acoustical Insulation
C 1338	Test Method for Determining the Fungi Resistance of Insulation Materials and Facings
D 120	Rubber Insulating Gloves
D 470	Crosslinked Insulations and Jackets for wire and cable
D 518	Rubber Deterioration – Surface Cracking
D 642	Test Method for Determining of Compressive Resistance Shipping Containers, Components, and Unit Loads
D 880	Test Method for Impact Testing for Shipping Containers and Systems
D 999	Vibration Testing of Shipping\Containers
D 1049	Rubber Insulating Covers
D 1149	Rubber Deterioration – Surface Ozone Cracking in a Chamber
D 1185	Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
D 2017	Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods
D 2020	Test Methods for Mildew (Fungus) Resistance of Paper &Paperboard
D 2059	Test Method for Resistance of Zippers to Salt Spray (Fog)
D 2344	Test Method for Apparent Interlaminar Shear Strength of Parallel Fiber Composites by Short-Beam Method
D 3273	Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings In an Environmental Chamber
D 3332	Test Method for Mechanical Shock Fragility of Products, Using Shock Machines
D 3580	Vibration (Vertical Linear Motion) Test of Products
D 3826	Practice for Determining Degradation End Point in Degradable Polyolefins Using a Tensile Test
D 3874	Ignition of Materials by Hot Wire Sources
D 4169	Performance Testing of Shipping Containers and Systems
D 4300	Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
D 4445	Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber
D 4504	Specification for Molded Polyethylene Open-Head Pails for Industrial Shipping of Nonhazardous Goods
D 4576	Test Method for Mold Growth Resistance of Blue Stock (Leather)
D 4577	Test Method for Compression Resistance of a Container Under Constant Load
D 4728	Random Vibration Testing of Shipping Containers
D 4783	Test Methods for Resistance of Adhesive Preparations in Container To Attack by Bacteria, Yeast, and Fungi
D 5034	Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
D 5035	Test Method for Breaking Strength and Elongation of Textile Fabrics (Strip Method)
D 5094	Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-style Closures
D 5112	Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
D 5276	Test Method for Drop Test of Loaded Containers by Free Fall
D 5277	Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
D 5415	Test Method for Evaluating Load Containment Performance of Stretch Wrap Materials by Vibration Testing
D 5487	Test Method for Simulated Drop of Loaded Containers by Shock Machines
D 5894	Practice for Cyclic Corrosion/UV Exposure of Painted Metal
D 6179	Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
E 640	Test Method for Preservatives In Water-Containing Cosmetics
E 645	Test Method for Efficacy of Microbicides Used in Cooling Systems
E 875	Test Method for Efficacy of Fungal Control Agents as Preservatives for Aqueous Based Products Used in the Paper Industry
F 219	Test Methods of Testing Fine Round and Flat Wire for Electronic Devices and Lamps
F 355	Test Method for Shock-Absorbing Properties of Playing Surface Systems and Materials
F 1387	Specification of Performance of Mechanically Attached Fittings
G 7	Practice for Atmospheric Environmental Exposure of Nonmetallic Materials
G 21	Determining Resistance of Synthetic Polymeric Materials to Fungi
G 22	Determining Resistance of Plastics
G 29	Determining Algal Resistance of Plastic Films
G 53	Operating Light and Water Exposure Apparatus for Exposure of Non-Metallic Materials
G 65	Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
G 85	Modified Salt Spray (Fog) Testing